 New Operator Control Panel Utilizing an All-In-One Panel Gauge
 New Extra-Heavy Duty Gearbox, Model 600, providing 12,000 inch pounds of Starting Torque per Gearbox and Continuous Running Torque of 7,000 inch pounds per Gearbox
 New Super Heavy-Duty Clutch with 3 Belt Drive, Specially designed for 100hp Engine
 Generation III, Hydraulic-Powered Joysticks
 Heavy-Duty 5-Blade Rotors
 Removable Engine Panels Front and Back Flip-up Seat
 Individual Manual Blade Pitch Controls
Control Panel
Easy Access Maintenance
 When panning in a forward direction, the weight of the rider is distributed across all ten feet, getting you on faster, and out flatter.
 Allows the edges of a slab to be panned in a forward direction. Can also travel through a section of ‘wet concrete’ without having to back out.
 For higher F#’s, we’ve placed our pans 8˝ apart, reducing ridging on the first pan pass.
|
| Specification: |
| Engine (Liquid Cooled) |
56 HP Turbo Charged Turbo Diesel |
| Length |
134" (340 cm) |
| Width |
66" (168 cm) |
| Height |
63" (160 cm) |
| Weight |
2,243 lbs (1017 kgs) |
| Detachable Guard Rings? |
Yes |
| Panning Path Width |
129" (328 cm) |
| Two Rotors (diameter) |
60" (152 cm) |
| Maximum Rotor Speed (RPM) |
110 |
| Ten Finish Blades |
6" x 23" |
| Gearboxes (2) |
Extra Heavy Duty (XHD) |
| Seat Frame, Bolt-On |
Removable Screens Front and Rear, Flip-Up Seat |
| Operator Control Panel |
Analog RPM-HR Meter and Micro Control Panel Gauge |
| Battery, HD |
12 Volt, 525 CCA |
| Pitch Control |
Manual Crank |
| Safety Shutdown Switch |
Yes, Foot Pedal |
| Cruise Control |
Available |
| Fuel Capacity |
12 Gal (45 Liters) |
| Aprox. Running Time Between Fueling |
8 Hours |
| Centrifugal Clutch |
6" (152 mm) with 8" (203 mm) Pulley |
| Drive Line System |
Rotating Shaft with Universal Joint |
| Engine Hour and RPM Meter |
Analog |
| Micro Panel Gauge |
Low Oil, Temp, Glow Plug and Charging |
| Amperage, Alternator |
65 Amp |
| Lights |
Six |
| Spray Retardant System |
6 Gal (23 Liters) |
| Lifting Bridle |
4 Point Pick |
| Optional features: |
| Combination Blades (10) |
8" x 23" |
| Optional rider accessories: |
| Two Pans |
1500 Series (61 3/4") |
| Dolly Jacks |
Recommended |
| Spider Pulling Tool |
Available |
| Trowel Arm Jig |
Available |
|
